How to Get a Blues Tone on Fender Mustang 1 Amp

The blues tone is an awesome one to nail down, and is used in a variety of classic songs. In this article, I'll go through exactly what makes a good blues tone, the most important amp settings, how to set your amplifier up, and some presets for popular blues songs.

Just looking for some blues amp presets and examples? Scroll down for examples of how to set up your amplifier to get the blues tone spot on.

The Quick Answer

Start with the following amp settings for blues guitar: low-moderate gain (2-4), low-moderate bass (2-4), medium to high mids (6-8) and medium to high treble (6-8). If your amplifier has built-in reverb, make sure you turn this on and have it set to around 1-4.

What Makes a Good Blues Tone?

Let's start off with the key characteristics of a good blues tone:

Low-level gain to create saturation and crunch
Boosted mids and treble
Low bass
Some low-mid level reverb

A blues tone should be overdrive and full, but not too distorted. The EQ should favour middle and treble frequencies to provide it with some brightness and clarity.

Most amplifiers have gain, bass, mids, treble and reverb controls built-in. Some amplifiers have a "tone" control or "EQ" control, instead of separate bass, mids and treble controls.

Here's a quick rundown of each control and how to set it for blues guitar.

Gain: this should usually be on around 2-4 and may also be called "drive" or "distortion". It needs to be high enough to drive the tone and add some saturation and crunch, but not too high so that it verges on rock/ metal styles.
Treble: this controls the high-range frequencies, giving the tone more clarity, bite and brightness. The treble control for blues should be moderate-high, giving the tone crispness and helping give it a more crunchy quality.
Mids: this controls the mid-range frequencies which help to give the tone depth. For blues, the mids, or "middle" control should be moderate-high to give the tone plenty of depth.
Bass: this controls the low-end frequencies. The bass setting for blues should be medium-low, as this prevents it from becoming too "boomy".
Reverb: this simulates an echo sound which adds life and colour to the tone. For blues, the reverb should be on around 2-4 to begin with. This prevents the tone from becoming flat and helps give it more character.

Depending on the amplifier you own, you may have slightly different controls. Here are some more popular settings and how to adjusts them for blues:

Presence: this adjusts the high-end frequencies but also influences the treble control by acting as a cap.
Contour: this works in opposition to the mids control. Lowering it will have the same effect as increasing the mids so have the contour on low for blues.
Tilt: this allows you to switch to treble-favoured frequencies, which can be useful if you are struggling too add brightness and clarity.
EQ or tone: adjust this so that it favours a mids-boosted or treble-boosted tone.

What about channels/ modes?

Most amplifiers have at least two channels that may be called clean and overdrive (or distorted etc). For blues, it's best to use the overdrive channel and have the gain medium-low so that you get some crunchiness and saturation, but nothing too heavy. If you have multiple distorted channels for example overdrive and distortion, then choose the overdrive mode.

The exception, is if you are using an overdrive pedal. If so, then select the clean channel on your amplifier.

Different brands also have different controls which need to be addressed. Make sure you check out the brand-specific amp controls guide which is relevant to you, to get the most from your rig:

Fender Amp Settings
Marshall Amp Settings
Boss Amp Settings
Orange Amp Settings
Line 6 Amp Settings
Vox Amp Settings

How to Set Up Any Amp for Blues

As well as understanding what makes a good blues tone, it's useful to know how to set up your amplifier to dial in the best settings based on your rig. Here's my step-by-step guide to getting a good blues tone.

Make sure your guitar's volume and tone controls are on maximum. Use the bridge pickup.
Set the volume to a comfortable level.
Select the overdriven channel (unless you are using a pedal).
Set the gain to 3, the treble and mids to 7, and the bass to 3.
Turn off reverb and any other effects.
Begin by adjusting the gain, if you require more saturation then increase it, or decrease it if it sounds too distorted.
Increase or decrease the mids depending on if the tone sounds too thin or too full, respectively. Play some chords and single string riffs to identify this.
Increase or decrease the treble depending on if the tone sounds too harsh or too mellow, respectively. Play some chords and single string riffs to identify this.
Adjust the bass control to add more or less low-end. Play some chords to identify if this is necessary.
Add some light reverb and any other effects you wish to.

The key to dialling in the best blues tone on any amp, is to make adjustments one at a time and listen carefully for the differences. This way, you'll be able to understand your amp much more, and be as precise as possible with your tone. It may take a little bit of time at first, but it's a very efficient method because you can pinpoint any issues you're having.

Common Problems

It's pretty inevitable for you to run into some minor issues when setting up your amp for the first time with a different tone. Here are some of the most popular issues when setting up an amp for blues, and some adjustments to try anf fix it. Remember to make each change one at a time!

Thin and Weak Tone

Increase the mids
Increase the gain
Increase the bass

Dull and Lifeless Tone

Add some reverb
Increase the treble
Increase the mids

High Feedback

Decrease the gain
Decrease the volume
Position the amp in front of the guitar and as far away from it as you can

Sounds too Much Like Rock and Metal

Lower the gain
Lower the bass
Increase the mids if it starts to sound thin due to the changes above

Amp Settings for Popular Blues Songs

Here are some of the most popular blues guitar songs and some example amp settings to start with. Remember that the best way to set up your amp is using the steps above and starting from scratch, but feel free to use these as a rough starting point. Just make sure that you take them with a pinch of salt and be prepared to make some adjustments as they may sound a little off depending on what guitar and amp you're using.

Amp Settings for Voodoo Child by Jimi Hendrix

Gain: 4
Bass: 5
Mids: 7
Treble: 7
Reverb: 4

Look for more Jimi Hendrix songs? Check out my complete Jimi Hendrix amp settings guide.

Amp Settings for Pride and Joy by Stevie Ray Vaughan

Gain: 3
Bass: 3
Mids: 6
Treble: 7
Reverb: 3

Amp Settings for The Thrill is Gone by B.B. King

Gain: 2
Bass: 4
Mids: 6
Treble: 8
Reverb: 3

Amp Settings for I'm Tore Down by Freddie King

Gain: 3
Bass: 3
Mids: 6
Treble: 9
Reverb: 3

Amp Settings for Sunshine of Your Love by Cream

Gain: 3
Bass: 5
Mids: 6
Treble: 6
Reverb: 2

Amp Settings for Same Old Song and Dance by Aerosmith

Gain: 4
Bass: 4
Mids: 7
Treble: 7
Reverb: 3

Looking for more songs by Aerosmith? Check out my complete Aerosmith amp settings guide.

Amp Settings for La Grange by ZZ Top

Gain: 5
Bass: 4
Mids: 5
Treble: 5
Reverb: 2

Amp Settings for All Your Love by Otis Rush

Gain: 4
Bass: 4
Mids: 6
Treble: 6
Reverb: 3

Amp Settings for Gravity by John Mayer

Gain: 2
Bass: 6
Mids: 3
Treble: 5
Reverb: 2

Looking for more John Mayer songs? Check out my complete guide to sound more like John Mayer for more tips and amp settings.

Amp Settings for Texas Flood by Stevie Ray Vaughan

Gain: 4
Bass: 5
Mids: 7
Treble: 7
Reverb: 2

Check out my complete guide to sounding like Stevie Ray Vaughan for more amp settings and tone tips.

Useful Effects Pedals

Pedal effects can be useful when trying to emulate the perfect blues tone. Here are some of the most popular pedals that you can pair with your amplifier.

Overdrive
Fuzz
Reverb
Delay

I've also written an article on the essential pedals for playing blues guitar, so check them out if you want to upgrade your rig.

Head over to my recommended gear page to find out my favourite effects pedals.

I have loads more amp settings guides for different styles of music and even for different bands. Check out more amp settings guides.

salierlecought.blogspot.com

Source: https://prosoundhq.com/blues-amp-settings-guide-to-getting-a-good-blues-tone/